VALOX ? Resin 745 |
SI | | British | | Metric | Europe-Africa-Middle East: COMMERCIAL |
|
VALOX 745 is 30% mineral filled PBT injection moulding resin with improved toughness and low warpage. Applications: telephone ringer |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Taber Abrasion, CS-17, 1 kg | 26 | mg/1000cy | SABIC Method | |
| Tensile Stress, break, 5 mm/min | 50 | MPa | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 10 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 3700 | MPa | ISO 527 | |
| Flexural Stress, break, 2 mm/min | 75 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 3400 | MPa | ISO 178 | |
| Hardness, H358/30 | 124 | MPa | ISO 2039-1 | |
| Hardness, Rockwell R | 112 | - | ISO 2039-2 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, unnotched 80*10*4 +23°C | 50 | kJ/m2 | ISO 180/1U | |
| Izod Impact, unnotched 80*10*4 -30°C | 50 | kJ/m2 | ISO 180/1U | |
| Charpy Impact, notched, 23°C | 7 | kJ/m2 | ISO 179/2C | |
| Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| THERMAL | Value | Unit | Standard | |
| CTE, 23°C to 80°C, flow | 7.5E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 80°C, xflow | 8.E-05 | 1/°C | ISO 11359-2 | |
| Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 | |
| Vicat Softening Temp, Rate B/50 | 138 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 143 | °C | ISO 306 | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 120 | °C | ISO 75/Be | |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 65 | °C | ISO 75/Ae | |
| Relative Temp Index, Elec | 105 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 105 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 105 | °C | UL 746B | |
| PHYSICAL | Value | Unit | Standard | |
| Mold Shrinkage on Tensile Bar, flow (2) (5) | 1.2 - 1.7 | % | SABIC Method | |
| Mold Shrinkage on Tensile Bar, xflow (2) (5) | 1.2 - 1.7 | % | SABIC Method | |
| Density | 1.46 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 0.9 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.09 | % | ISO 62 | |
| Melt Volume Rate, MVR at 250°C/2.16 kg | 5 | cm3/10 min | ISO 1133 | |
| ELECTRICAL | Value | Unit | Standard | |
| Volume Resistivity | >1.E+15 | Ohm-cm | IEC 60093 | |
| Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 | |
| Dielectric Strength, in oil, 1.6 mm | 24.8 | kV/mm | IEC 60243-1 | |
| Dielectric Strength, in oil, 3.2 mm | 23 | kV/mm | IEC 60243-1 | |
| Relative Permittivity, 100 Hz | 3.3 | - | IEC 60250 | |
| Relative Permittivity, 1 MHz | 3.2 | - | IEC 60250 | |
| Dissipation Factor, 50/60 Hz | 0.002 | - | IEC 60250 | |
| Dissipation Factor, 100 Hz | 0.002 | - | IEC 60250 | |
| Dissipation Factor, 1 MHz | 0.014 | - | IEC 60250 | |
| Relative Permittivity, 50/60 Hz | 3.3 | - | IEC 60250 | |
| FLAME CHARACTERISTICS | Value | Unit | Standard | |
| UL Recognized, 94HB Flame Class Rating (3) | 1.5 | mm | UL 94 | |
| UL Recognized, 94HB Flame Class Rating 2nd value (3) | 3 | mm | UL 94 | |
| Glow Wire Flammability Index 650°C, passes at | 3.2 | mm | IEC 60695-2-12 | |
| Oxygen Index (LOI) | 22 | % | ISO 4589 | |
| Source GMD, last updated:2011/04/25 |
|
Processing |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 110 - 120 | °C |
| Drying Time | 4 - 6 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 260 - 285 | °C |
| Nozzle Temperature | 265 - 275 | °C |
| Front - Zone 3 Temperature | 260 - 280 | °C |
| Middle - Zone 2 Temperature | 255 - 280 | °C |
| Rear - Zone 1 Temperature | 240 - 260 | °C |
| Hopper Temperature | 40 - 60 | °C |
| Mold Temperature | 60 - 110 | °C |
| Source GMD, last updated:2011/04/25 |
| Compare | Contact Us | |
| VALOX? Resin | ||
| Grades |
De |
|
| 3007 |
LIMITED USE, No New Customers / Applications as of Jan. 2010 Unreinforced PBT. For flexible hinges. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 310SE0 |
Unreinforced, flame retardant PBT. V0-0.7mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 315 |
Unreinforced PBT. Compliant with food contact regulations acc to EC Reg. No. 10/2011. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 325 |
General purpose, unreinforced, medium flow PBT. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 325FC |
VALOX 325FC is compliant with food contact regulations. VALOX 325FC is a general purpose, unreinforced PBT injection moulding resin which contains internal mold release. This new 325FC grade is a good processable resin that exhibits faster and more e Datasheet Product Data: Auto Data: |
|
| 3607U |
COMMERCIAL, VALOX 3607U is a UV-stabilized, flame retardant, injection moulding PBT resin, offering excellent weatherability resistance. Applications: powerplugs Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4012G |
10% glass fibre reinforced PBT with excellent mechanical properties. Applications: connectors. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4022 |
20% GR. Improved mechanical performance versus VALOX 412. For spotlights, appliance housings and handles. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4031 |
30% GR. Improved mechanical performance versus VALOX 420. For handles, spotlights, electric motors, etc. Datasheet Product Data: Auto Data: |
|
| 420 |
30% glass reinforced PBT. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 420HP |
30% Glass filled PBT resin, FDA Food Contact compliant in limited colors. Datasheet Product Data: Auto Data: |
|
| 420SE0 |
30% GR, UL94V-0/5V rated. Numerous applications; edge trimmers, food mixer motor stator and commutator, cooling fan, connectors, bobbins, switches etc Datasheet Product Data: Auto Data: |
|
| 430 |
33% GR PBT. Good impact, excellent stiffeness and strength. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 451E |
20% glass reinforced, flame retardant PBT. V0-0.7mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4521 |
20 % Glass Reinforced flame retardant PBT. This material has a high flow and a high CTI. For electrical applications . Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 457 |
6.5% glass reinforced, flame retardant PBT. V0-0.7mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 4631 |
30% GF Flame retardant PBT with improved electrical properties Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 508 |
30% glass reinforced PBT. Low warpage characteristics. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 553 |
30% glass reinforced, flame retardant PBT. Low warpage characteristics. V0-0.8mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 735 |
40% glass/mineral reinforced PBT. Improved surface appearance. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 745 |
30% mineral reinforced polyester improved toughness and low warpage. Typical applications are telephone ringer Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 771 |
Mineral/glass reinforced flame retardant grade. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 815 |
15% glass reinforced PBT. Improved surface appearance. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 830 |
30% glass reinforced PBT. Improved surface appearance. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| 855 |
15% glass reinforced, flame retardant PBT. Improved surface appearance. V0-1.6mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| 865 |
30% glass reinforced, flame retardant PBT. Improved surface appearance. V0-1.6mm. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| DR48 |
17% glass reinforced, flame retardant PBT. V0-0.9mm. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| DR48 - CS1049 |
15% glass reinforced, flame retardant PBT. V0-0.9mm. Datasheet Product Data: Auto Data: |
|
| DR51 |
15% glass reinforced PBT. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| ENH3500 |
PBT, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| ENH4530 |
PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| ENH4550 |
PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| ENH4560 |
PBT, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| ENH4565 |
PBT, PTFE, Glass, Mold Release, Non-Brominated & Non-Chlorinated Flame Retardant, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| HX312C |
Unreinforced PBT with release. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant. EtO and steam sterilizable. Datasheet Product Data: Auto Data: |
|
| HX420HP |
Medium Flow, 30% Glass filled, Polybutylene Terephthalate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant. Available in limited colors Datasheet Product Data: Auto Data: |
|
| K3501 |
Unfilled PBT, Mold Release, Heat Stabilized, Impact Modified, Opaque, A hydrollytically stable grade designed for challenging heat/humidity environments. Datasheet Product Data: Auto Data: |
|
| K4530 |
15% glass reinforced PBT, Hydrolytically stable, High flow, Automotive connectors. Datasheet Product Data: Auto Data: |
|
| K4560 |
30% glass reinforced PBT. Impact modified, high flow, hydrolytically stable. Datasheet Product Data: Auto Data: |
|
| SHF4910 |
PBT, Flame Retardant, Glass, Datasheet Product Data: Auto Data: |
|
| SHF4930 |
PBT, Super High Flow, Flame Retardant, High CTI, Glass, Mold Release, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| SHF4960 |
PBT, Super High Flow, Flame Retardant, Glass, High CTI, Mold Release, Heat Stabilized, Datasheet Product Data: Auto Data: |
|
| V2000DM |
PBT, Mold Release, Datasheet Product Data: Auto Data: |
|
| V3500EX |
Unfilled PBT,Flame Retardant, good flow, high elongation at break Datasheet Product Data: Auto Data: |
|
| V4860HR |
PBT, Flame Retardant, Glass, Flame retardant, Weatherable, Datasheet Product Data: Engineering Design Data Auto Data: |
|
| VX4920 |
20% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| VX4930 |
30% Glass reinforced nucleated PBT/ASA with excellent mechanical properties high dimensional stability, and low density. Datasheet Product Data: Engineering Design Data Auto Data: |
|
| VX5011 |
10% glass reinforced PBT. Low warpage characteristics. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
| VX5022 |
20% glass reinforced PBT. Low warpage characteristics. Datasheet Product Data: Engineering Design Data Auto Data: Auto Specification |
|
簡繁切換